Dismantling And Disposal; Dismantling - Siemens SIPROCESS GA700 Kompaktbetriebsanleitung

Dismantling and disposal

9.1

Dismantling

Incorrect disassembly
The following dangers may result through incorrect disassembly:
- Injury through electric shock
- Danger through emerging media when connected to the process
- Danger of explosion in hazardous area
Observe the following for correct disassembly:
• Before starting work, ensure that the power supply and pressure supply are
• If the device contains dangerous process media, empty the device prior to disassembly.
• Secure the remaining connections so that no damage can result if the process is started
Hot surfaces resulting from hot sample gases and heated devices
Danger of burns resulting from surface temperatures above 70 °C (155 °F)
After being switched off, the device and its parts are still very hot. Touching can result in
skin burns.
• Begin the maintenance / shutting down once the device has cooled off.
• Take appropriate protective measures, for example contact protection.
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04
WARNING
disconnected and hot device surfaces have cooled off.
Make sure that no media are released which are environmentally hazardous.
unintentionally.
CAUTION
9
91