Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
N4+ – Maintenance and do-it-yourself
Task
Exchanging the carbon filter
(
)
page 46
When necessary
Task
Updating the software and firm-
ware (
)
page 51
Cleaning the housing
(
)
page 51
Exchanging the main fuse
(
)
page 51
Wear parts that you can exchange yourself
Wear part
Gasket working chamber door
(
)
page 54
Tool magazine inserts
(
)
page 53
Coupling of the cooling liquid tank
(
)
page 49
Collet chuck
(
)
page 42
Wear parts that customer service exchanges for you
Wear part
Cooling liquid pump
Spindle bearings (requires spindle
exchange by customer service)
These are recommendation guidelines. Depending on the processing material and how well the machine is cleaned, these values may
*
differ.
Recommended interval
Every 4 weeks
Recommended interval
When an update is available
Recommended interval
500 operating hours
*
Every 2 years
*
500 operating hours
*
Every 2 years
*
1,000 operating hours
*
Every year
*
1,000 operating hours
*
Recommended interval
2,000 operating hours
*
2,000 operating hours
*
Original Operating Instructions: N4+
Version: 12/16/2021
Procedure / Parts
Procedure / Parts
Microfiber cloth, Water, Mild
cleaning agent (optional)
Replacement fuse T6,3A
L250V
Procedure / Parts
Remove and insert collet
chuck as when cleaning it
Procedure / Parts
EN 57
Tool illustration
Spare part illustration
Spare part illustration
Spare part illustration
Werbung
Inhaltsverzeichnis
Fehlerbehebung
