Cam Computer; Sound Emission; Location Of The Identification Plate & Serial Number; Axes - VHF N4+ Originalbetriebsanleitung

EN 12

4.6 CAM computer

To operate the machine, you must use a computer
running Windows ("CAM computer") and specially
®
designed software ("manufacturing software"). The
manufacturing software consists of the following
components:
DENTALCAM ‒ A CAM application for creating
n
and calculating virtual blanks ("jobs").
DENTALCNC ‒ A CNC application for machining
n
jobs and maintaining the machine.
To create and design the dental objects you also need
a CAD application (sold separately by specialist
dealers).

4.7 Sound emission

The actual sound emission of the machine varies
heavily depending on the manufacturing material and
the machining conditions.
If the machine is exceptionally loud, check the fol-
lowing operating conditions:
Cleanliness of the blank holder
n
Condition of the tools
n
Quality of the blanks
n
If loud noise cannot be avoided, wear ear protection
during machining.
Sound measurement
Measuring conditions:
Processed material: MEDENTIKA® PreFace®-Abut-
n
ment, Titanium, 11.5 mm
Tool status: new
n
Measured value: sound power level
n
Measurement according to ISO 3746, survey
n
method 3
Established sound emission:
Operating condition
Processing
All other operating conditions (tool
change, movement of the axes etc.)
4.8 Location of the identification
plate & serial number
The identification plate of the machine contains identi-
fying information such as the serial number. You can
find the identification plate and machine serial number
at the following location:
page 10

4.9 Axes

This machine has 4 axes: 3 linear axes and 1 rotary axis.
F
AXES
AXIS
A-weighted
sound power
level
76.5 dB(A)
<70 dB(A)
Original Operating Instructions: N4+
Version: 12/16/2021
N4+ – Machine overview

. 7 N4+: L X, Y, Z (T
IG INEAR AXES HE SPINDLE MOVES ALONG THESE
.); R A (T
OTATIONAL AXIS HE BLANK HOLDER ROTATES ABOUT THIS
.)
Connection panel – on