Installing The Machine; Checking The Scope Of Delivery - VHF N4+ Originalbetriebsanleitung

EN 14
5 INSTALLING THE
MACHINE

5.1 Checking the scope of delivery

Unpack the machine and ensure that you have
received the following items:
1
3 4
7 8
11 12
15 16
2
5 6
Not depicted:
9 10
13 14
17
Original Operating Instructions: N4+
Version: 12/16/2021
N4+ – Installing the machine
1. 1 x Machine N4+
2. 1 x Spindle service set
3. 1 x Power cable
4. 1 x Ethernet network cable (type: straight)
5. 1 x Compressed air regulator
6. 1 x Pneumatic hose
7. 1 x Torque wrench (1.8 Nm), with hexagon nut (2.5 mm)
and torx nut (TX 10)
8. 1 x Container with pH test strips
9. 1 x Cleaning brush
10. 1 x Interdental brush (for cleaning the nozzle plate)
11. 1 x Container with activated carbon pellets
12. 1 x Fine filter
13. 2 x Tool magazine insert
14. 1 x Drill bit (2.8 mm) for tool positions
15. 1 x Measuring pin
16. 1 x Calibration set: 1 micrometer, 4 blanks for man-
ufacturing test and calibration specimen, 2 fixing pins with
screws, 1 radius cutter with 2 teeth (P200-R2-35)
17. 2 x Key for the emergency release of the working chamber
door
This document
n
1 x Transport lock in the working chamber
n
1 x Supplement about removing the transport lock
n
1 x Measuring pin for customer service
n
1 x Bottle of cooling lubricant Tec Liquid Pro (1 l)
n
1 x Measuring cup (250 ml)
n
3 x Spare screw for the blank holder
n
3 x Bag with Tec Powder for cleaning the cooling
n
liquid system (50 g per bag)
Keep the packaging of the machine, the carrying aid
and the transport lock for future transports.