Working Chamber; Cooling Liquid Drawer - VHF N4+ Originalbetriebsanleitung

N4+ – Machine overview

4.4 Working chamber

You can mount blanks and insert tools into the working
chamber. This is where the blanks are processed.
F . 4 W
IG ORKING CHAMBER
1. Measuring key
2. Tool magazine
3. Spindle
4. Nozzle plate
5. Blank holder; Rotational axis A
6. Outlet for the cooling liquid
7. Webcam
Colors of the working chamber lighting
If the working chamber lighting is insufficient,
provide additional lighting.
The machine illuminates the working chamber in
different colors. The color will change depending on
the state of the machine. You will find the colors and
respective machine status in the following table:
Color
Green The machine is ready for operation.
You can open the working chamber door.
White The machine is ready for operation.
You can open the working chamber door.
Blue The machine is operating.
The working chamber door is locked.
Red A machine malfunction has occured.
Status
Original Operating Instructions: N4+
Version: 12/16/2021
Color
The working chamber door is locked.
4.5 Cooling liquid draw er
In the cooling liquid drawer below the working
chamber the cooling liquid tank is located. The cooling
liquid tank
To access the cooling liquid tank, manually pull the
cooling liquid drawer out of the machine. Only open
the cooling liquid drawer when the working cham-
ber door is closed and the machine is not operating.
Immediately wipe up leaked cooling liquid.
F . 5 O
IG PENING THE COOLING LIQUID DRAWER
F . 6 C
IG OOLING LIQUID DRAWER
1. Cover of the cooling liquid tank
2. Strainer basket
3. Cooling liquid tank
To close the cooling liquid drawer, push it into the
machine until it is completely closed.
EN 11
Status