Configuring The Cad Computer - VHF N4+ Originalbetriebsanleitung

N4+ – Installing the machine
F . 29 T
IG HE DATA TRANSFER FOLDER FOR
If it doesn't, do the following:
a. To store the data transfer folder in
DENTALCNC, select the depicted
icon to the right of the CAD/CAM
integration: Data transfer folder label.
A window for selecting the folder opens.
b. From the drop-down list, select the drive let-
ter c:.
c. Select the following folder:
CADshare\DentalNestingObjToMDW
d. Select the depicted icon.
The selected folder displays below the
CAD/CAM integration: Data transfer folder
label.

5.9.6 Configuring the CAD computer

1. Access the CAD computer.
2. Install exocad ChairsideCAD.
3. Map a network drive to the C:\CADshare\Dent-
alNestingObjToMDW folder that you created on the
CAM computer.
Record the drive letter.
n
Enter the exact folder path including the
n
leading backslashes \\.
Enter the login credentials for your CAM
n
computer.
Store these login credentials on the CAD
computer.
Activate the Reconnect at sign-in option.
n
Setting up exocad ChairsideCAD
1. In Windows Explorer, open the exocad Chair-
®
sideCAD folder.
2. Change into the config folder.
3. Open the following file with a text editor:
settings-chairside.xml
CAD/CAM
INTEGRATION
Original Operating Instructions: N4+
Version: 12/16/2021
4. Inside the file, find the following expression
("tag"):
<NestingInterop2TemporaryFolder>
Directly behind the expression, you will find the
exocad output path.
5. Replace the output path with the letter of the net-
work drive that you recorded followed by a colon
(:).
Example: You recorded the drive letter Z. The
expression in the XML file must be (without line
breaks):
<NestingInterop2TemporaryFolder>
Z:
</NestingInterop2TemporaryFolder>
6. Save and close the XML file.
EN 27