Operation
Favorites
Hei-TORQUE Ultimate type devices provide the option of storing multiple consecutive
process steps (ramps) as a profile in the system memory (see section "Profiles" on page
75).
The stored profiles can be displayed and started, adjusted and deleted from the system
Favorites
via the
Favorites
➜
Open the
–
All stored profiles are listed on the display.
➜
Select the required profile and press the push-and-rotary control to confirm.
Options
Display
➜
Select
➜
To start the profile, select the
bottom edge of the display and then press the push-and-rotary control to confirm.
Activate
–
If
stops
Continuous operation
–
If
continuous loop until the stirring movement is stopped manually
Edit
➜
Select
to open the profile and use it as a template for a new profile. After
calling up the profile, follow the instructions in section "Creating a profile" on page
75.
Delete
➜
Select
to remove the profile from the system memory.
Existing profiles cannot be edited, they can only be used as a
template for new profiles!
menu.
menu from the Device menu:
, to display all the profile's data.
Activate
is selected the profile is worked through once and then the stirrer
is selected the profile is worked through in a
Continuous operation
or
77
at the