TITAN LIFE C65 Bedienungsanleitung Seite 212

1. Press "UP" or "DOWN" key to select a particular function you want；
2. Press "START" key to starting motion, or press "ENTER" key into setting mode.
3. In setting status, press "ENTER" key to choose setting items with relevant flashing window for
DISTANCE→CALORIE→AGE →Resistance Value;
4. Press "UP" or "DOWN" key to upward or downward adjusted, and press "ENTER" key to next item;
5. Press "START" key to starting;
6. It can be adjusted the resistance value level automatic during the motion status, or press "UP" "DOWN" to manual
adjustment;
7. If time, distance, calories, or any of these are setting，The corresponding value will be inverted in motion status。
When any of setting value count to 0, the motion will be STOP and "DI DI" Voice Prompt;
8. Press "STOP" key to STOP the motion , in the motion status;
RECOVERY MODE
In exercising status, first test your pulse as above mentioned. Then press "RECEOVERY" key to enter pulse recovery
function. The display will show 1 minute count-down as well as your pulse rate. Hold on the pulse sensor until it counts
down to zero. Then, it will pop up your pulse recovery level from F1 to F6, that is, from the
fastest recovery to slowest. The fastest recovery F1 show the best;
Bluetooth &APP（Optional）
1. Turn on mobile bluetooth and APP, Click "SEARCH" ;
2. Select a device, and click "CONNECT";
3. The monitor icon will be show；
4. Press "START" key to starting motion, At this the monitor will close the display;
5. Click "CONNECT" can be control you monitor；
6. Click "STOP"， STOP the motion;
Note: Reconnect if a flashback occurs after connecting, or restart the monitor;
WIRELESS PLUSE (Optional）
Supports the standard 5.3Khz wearing heart rate detector；
1.Please wet the two electrodes of the heart rate
detector;
2.Wear the heart rate detector on your chest.
Note:
1. This monitor uses a 9V/1A power adapter。
2. When the monitor is abnormal, please pull out the power plug and re-insert.
`
TIME→