Transport and storage
Wood splitters are fitted with big wheels. Grab the handle on the splitting post with both hands and slightly
tilt the splitter back when transporting the machine. To make tilting easier, stand on the curved caliper
under the engine.
To prevent hydraulic oil leak, never transport the splitter laid down.
Always move the splitting knife absolutely down during transportation.
Technical data
Maximum output:
Capacity:
Engine design:
Fuel / tank capacity:
Consumption:
Starting system:
Maximum hydraulic pressure:
Splitting post:
Max. splitting pressure:
Max. splitting lift:
Max. length of split material:
Max. length of split material:
Table size:
LWA noise:
Weight app.
Dimensions L x W x H in mm:
EAN: 4015671 22045 5
Article number: 02012
Assembly and first starting up
Operating arms
10
2.
Insert the operating arm and take the tube to the cross joint hole (pic. 11)
Left operating arm is marked by letter "L" and right one by "R"!!!
4,1 kW/5,6 PS
206 ccm
Power- Engine 4-Takt OHV
unleaded/4 l
0.75 l an hour
reversing starter
240 bar
100 x 100 mm
11 t
520 mm
1,430 mm (without splitting cross)
1,170 mm (with splitting cross)
app. 385 x 320 mm
95 dB(A)
192 kg
1,240 x 582 x 1,284
1. Unscrew the operating arm bracket (pic. 10)
11
Fetten
11a