Herunterladen Inhalt Inhalt Diese Seite drucken

Environment Protection; Residual Risks And Protective Measures - Gude DHH 1050/11 T ECO Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Environment protection:

Dispose waste
Packing cardboard
professionally so as not
material may be
to harm the
delivered to collecting
environment
centres for recycling.
Package:
Protect against
moisture
Use as designed
The wood splitter has exclusively been designed for splitting of firewood pieces already cut by a saw, with a
maximum length of 1,430 mm (without the splitting cross).
The appliance must not be used to any other works than those for which it has been designed and that are
described in the Operating Instructions.
Should any provision of the generally valid regulations and provision contained in these Operating
Instructions be breached, the producer cannot be held liable for any damage. Never split any wood laid
down or over the fibre

Residual risks and protective measures

Warning!!!
Taking out of service, changing, blocking, disassembling, altering or adding any parts of safety and
protective devices strictly prohibited. Failing to comply with this condition can lead to injuries
dangerous to life.
The producer cannot be held liable for any material damage or injuries of persons caused by
negligence.
Any guarantee claim towards the producer expires with the negligence described above.
Mechanical residual risks
Threat
Contusion
Cut
General injury
Any damaged and
disposed electric or
electronic appliances
must be delivered to
appropriate collecting
centres.
This side up
Fragile
.
Description
Parts of body can be contused
or amputated due to hydraulic
knife starting when splitting.
Risk of split material getting
stuck. When releasing the wood
please be aware the wood is
exposed to big stress and your
fingers can get squeezed in the
slot created by wood cracking.
Parts of body can be contused
or amputated due to hydraulic
knife starting when splitting.
Fierce splitting can lead to
serious injury when processing
dry wood.
Protective measures
Always use the two-hand safety
control. Do not interfere in the
splitting process.
Never work in two on the
machine.
Jammed wood needs to be
knocked out. At doing so, make
sure the falling piece of wood
does not injure your legs.
Always use the two-hand safety
control. Do not interfere in the
splitting process.
Never interfere in the splitting
process.
Always keep a sufficient safety
distance from the splitter.
Always operate the machine
with care and deliberately.
Residual risk
Any worn-out or damaged aid
must immediately be replaced.
Look out for bystanders!
Always wear safety boots when
working.
Any worn-out or damaged aid
must immediately be replaced.
Any worn-out or damaged aid
must immediately be replaced.
Always look out for bystanders.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

02012

Inhaltsverzeichnis