Product Safety - Gude DHH 1050/11 T ECO Bedienungsanleitung

Use an appropriate supporting tool for splitting heavy or big pieces.
•
Tool change, adjustment, cleaning, maintenance and fault removal must only be performed when the
•
engine is switched off. Pull the plug out of socket!
All protective and safe equipment must be refitted immediately after repair and maintenance are
•
finished.
Put the splitter on a flat and nonslip operating surface before using it. Ensure sufficient free movement.
•
Never use the wood splitter when raining.
•
Line voltage must correspond to the details on the appliance type label.
•
Unwind the cable to the full extent when a cable drum is used to prevent it from heating.
•
The socket must be fitted with a safety switch against stray current when working outdoors.
•
The processed piece of wood must always be put on the appliance surface in a stable position to
•
prevent it from moving.
Do not split soaked wood.
•
Only one piece of wood should always be split.
•
Do not split wood containing foreign items.
•
Marking on the appliance
Symbol explanation
The following symbols are used in these Instructions and/or on the appliance:

Product safety:

Product corresponds to
appropriate European
Community standards
Prohibitions:
General prohibition (in
Do not touch inside the
connection with
another icon)
Warning:
Warning against
Warning/Attention
dangerous voltage
Keep safe distance
Commands:
Use vision protection Use head protection
aids
Read the Operating
Instructions before use
No cable pulling
appliance
Warning against hand
injury / contusion
Use hearing protection
aids aids
Warning against hot Warning against
surfaces dangerous voltage
Use safety shoes with
Use protective gloves
safety steel toe
Appliance can only be
used outside enclosed
spaces
Unplug the appliance
before opening it