Gude DHH 1050/11 T ECO Bedienungsanleitung Seite 23

Tip: Lubricate sheet foots up and down first!
13
Now insert the safety pins included in the supply to the back of the bracket with operating arm as illustrated
in (pic. 15).
Finally you need to screw down the bracket cover! (pic. 16)
Splitting wedge extension
3. Now put screws through the bracket and operating arm from
above (pic. 12)
4. Secure the screw with a lock nut. (pic. 13)
5. Now you can tighten the operating arm.
14
Before you start working with the splitting
wedge extension you need to disassemble the
short wood table.
Fix the splitting knife extension by tightening the
screw manually at first. Then tighten it with a
socket-screw key.
15
16
ATTENTION!!!