Configuration; Graphical User Interface - axing EOC 30-01 Betriebsanleitung

6. Configuration

6.1. Graphical user interface

The configuration of all EOC devices is done via the graphical user interface of the EOC master. To access the
user interface, you need a standard PC/laptop with a network interface, a commercially available network
cable and the actual version of the installed web browser.
The following IP address data is set ex factory for the
IP adresse: 192.168.1.1
Subnet mask: 255.255.255.0
Your PC must be in the same IPv4 network section.
 Change the IP address of your PC/laptop, e.g. to 192.168.1.2, subnet mask 255.255.255.0
 Connect the PC to the RJ-45 Ethernet port LAN1.
 Enter the IP address 192.168.1.1 in the address line of your browser.
 Enter admin as the Username.
 Enter admin as the Password.
 After successful login, please configure in a secure password.
2022-01-17 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_EOC-30-xx.pdf
:
EOC-master
Page 17 of 42