The Dp1.2-Vision-Cat Series; Available Variants; Optional Connection To A Kvm Matrix Switch - G&D DP1.2-Vision-CAT Bedienungsanleitung

The DP1.2-Vision-CAT series

The DP1.2-Vision-CAT series
KVM extenders of the
user modules.
Connect the computer to be operated as well as an optional console to the computer
module ( DP1.2-Vision-CAT-CPU
( DP1.2-Vision-CAT-CON
Both the computer module and the user module are connected via a category 5e (or
better) twisted pair cable. Signals of keyboard, mouse and DisplayPort™ video of
the computer connected are transmitted using these cables and enable you to oper-
ate the computer remotely.
The computer can either be operated at the remote console of the user module or at
the local console of the computer module.

Available variants

The
DP1.2-Vision-CAT
transmission of USB 2.0 signals:
Variant
DP1.2-Vision-CAT-AR
DP1.2-Vision-CAT-ARU
DP1.2-Vision-CAT-ARU2

Optional connection to a KVM matrix switch

As an alternative to using the devices as stand-alone units, you can also connect the
computer modules (
compatible G&D KVM matrix switches.
Use the CPU modules to connect computers and the
stations to the matrix switch.
The above-mentioned variants are compatible with the following matrix switches:
 DVI-Center-Serie:
 ControlCenter-Compact-Serie:
 ControlCenter-Digital-Serie:
2 · G&D DP1.2-Vision-CAT
DP1.2-Vision-CAT
). The remote console is connected to the user module
).
series provides further variants that additionally enable the
Video channels
1
1
1
CPU ) and the user modules (
Version 2.0.001 or later
Version 1.0.001 or later
Version 2.0.001 or later
series consist of a computer module and a
USB 2.0
not supported
full speed
high speed
CON ) of the
CON modules to connect work-
DP1.2-Vision-CAT series to