Selecting A Keyboard Layout For Inputs Via Osd - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on Configuration
3. Click on the tab
4. Click on the tab
workstation (on the
Click on the tab
workstation (on the
5. In the Screensaver (minutes)
the screensaver.
Entering the value 0 disables the screensaver.
6. Click on Save

Selecting a keyboard layout for inputs via OSD

If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
1. Press Ctrl+Num
2. Select the row
3. Under
OSD key. layout
 German

English (US)
 English (UK)

French

Spanish
 lat. American

Portuguese
 Swedish
4. Press F2 to save your settings.
KVM extender .
.
General .
if you want to configure the screensaver of the local
CPU
CPU module).
CON if you want to configure the screensaver of the remote
CON module).
row, enter the waiting time (1 to 999 minutes) of
.
(default) to open the on-screen display.
and press
Console setup
press to select one of the following options:
F8
.
Enter
G&D VisionXS-IP-F-DP-UHR · 48
Configuration