Symbols And Formatting; Designations - Aventics Marex OS II Bedienungsanleitung

Hazard classes according to ANSI Z535.6-2006
Warning sign
Signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols and Formatting

The following symbols and formatting helps in comprehending the documentation and improves the structure of the
document.
Symbol Meaning
Formatting
▪ Bullet for bulleted lists
► Single, independent step (instruction for action) in safety instructions
► Single, independent step (instruction for action)
1. The individual steps in instructions which must be executed in a given order have ordinal numbers.
2.
This symbol identifies texts that contain hints and tips for proper handling of the system. If this information
is not observed, optimum use or operation of the product cannot be ensured.
Press the SELECT button.
Turn the SELECT button.
Press the ESCAPE button.
1.3.3

Designations

The following designations are used in this documentation:
Designations for devices
lever
single lever
double lever
four button lever
two button lever
Meaning
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
Property damage: the product or the environment may be damaged.
Meaning
Designation for control head on the menu of the MPC control unit
Control head with one lever for use with single engine systems
Control head with two independent levers for use with twin engine systems
Control head type 244 (equipped with four buttons)
Control head type 240/241 (equipped with two buttons)