Maintenance/Cleaning - Silvercrest SIKP 2000 F1 KAT Bedienungs- Und Sicherheitshinweise

SilverCrest SIKP 2000 F1 KAT
After 30 seconds, the induction hotplate switches back to the power level, temperature or function
previously selected.
While the boost function is activated, press the function button
function and continue at power level L05 or temperature 120.

8. Maintenance/cleaning

In order to avoid burning food residues, clean the induction hotplate after every use.
Risk of burns!
Wait until the heating zone (2) is completely cool before cleaning it. Otherwise you could get
burnt.
Risk of electric shock!

Always remove the power plug from the mains socket before cleaning. Failure to do so
could cause an electric shock.

Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface. These
could damage the heating zone (2).
Clean the side surfaces and the power cable (1) with a slightly damp cloth.
Dirt and burnt-on food residues on the surface of the heating zone (2) can be cleaned off using a scraper
for glass hotplates and an appropriate detergent.
52 - English
(9) to cancel the boost