Multifunction Display; Switching The Cruise System On And Off - Torqeedo Cruise 10.0R TorqLink Originalbetriebsanleitung

Operation
6.2

Multifunction display

6.2.1

Switching the Cruise System on and off

W AR N IN G !
Danger to life from overestimating the remaining range.
This can result in severe physical injuries or death.
Before starting a trip, make yourself familiar with the travel area, because the
range displayed on the onboard computer does not take wind, current, and
direction of travel into account.
Build in a sufficient buffer for the necessary range.
The range calculation displayed by the on-board computer does not take into
account any changes in wind, current, or direction of travel. Changes in wind,
current, or direction of travel can result in much shorter ranges than displayed.
1
Fig. 49: Multifunction display
1
On/Off button
Switching the system on
1. Press the On/Off button (1) on the display for the accelerator lever.
EN DE
page 87 / 113