Signals Received / Sent Via C-Can - Fiat TIPO Bedienungsanleitung

During the key on STOP/MAR-ON cycle, the Body Computer Node maintains the status
requested previously by the user. The steering is still assisted and decreases as the speed
increases.
C-CAN line
The control unit is capable of receiving/transmitting information on the CAN. This network interface is
operational from when the key is turned to MAR-ON until it is turned to STOP.

Signals received / sent via C-CAN

The signals received by the Electric Steering Node control unit on the CAN are:

Car speed

Failure warning light status

Engine running signal (D+)

Diagnosis

Car speed signal error

Normal / City mode

Type of tuning (calibration)
The signals sent by the Electric Steering Node control unit on the CAN are:

System status (failure)

Power steering activated signal

Diagnosis

Absolute steering wheel position (only for Electric Steering Node version for applications
with ESC)
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -8- 0.0
REV