Electric Steering Node
The electronic unit processes the input signals received by the sensors and operates the motor,
supplying a suitable current to produce the desired power steering torque. It also manages the
communication on the CAN and carries out the continuous self-diagnosis of the system to ensure
correct operation. The communication on the CAN is managed using the diagnosis equipment.
The values relating to the speed of the vehicle, City/Normal mode and the type of tuning are read on
the CAN line.
The position and torque signals from the sensors represent the basic values with which the
microprocessor processes the output data in terms of current supplied to the engine.
The steering power assistance control unit is fixed to the casing of the electric steering itself and
interfaces with the wiring by means of two separate connectors: one 10-pin and one 2-pin.
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO
-3-
0.0
REV