Put On Service And Use; Assembly / Disassembly - Hendi 250VV Bedienungsanleitung

adequate individual protection devices, five fingers
anti cutting gloves. All interventions on the discs

4. PUT ON SERVICE AND USE

The machine management is allowed only to the
authorized personnel and opportunely educated and
endowed of a sufficient technical experience.
Before to switch on the machine perform the fol-
lowing operations:
The not authorized use of commercial parts and
accessories making part of the protections and
safety devices can cause some malfunctions and

ASSEMBLY / DISASSEMBLY

The assembly / disassembly operations of every de-
vice of the machine are performed with the ma-
chine stop and with the plug disconnected from the
socket, or with the sectioning device in OFF.
TOOLS ASSEMBLY
HENDI 224328
Align and insert the coupling (5) of the mixer (3)
in the clutch (2) of the machine body (1)
Screw the mixer (3) up to fasten
it firmly to the machine body (1)
TOOLS ASSEMBLY
HENDI 224373, 282298, 224335, 224380, 224397,
282311, 224359, 224052
Align and insert the tools coupling (5) in the quick
clutch (2) of the motor body (1)
Turn the tools (3-4) up to fasten
them firmly to the machine body (1)
The disassembly activities perform following in
a backwards way the assembly phases previously
described.
must happen keeping them with the blades towards
the bottom side.
• Read with attention the technical documentation,
• Know what protections and emergency devices
are available on the machine, their location and
functioning.
the ranger situation beginning for the operators.
The operator must besides have received an ade-
quate training.
The machine assembly goes on in different phases
(for example it is showed the machine with base
body).
EN
11