General Information And Characteristics - Hendi 250VV Bedienungsanleitung

ages caused from the improper use or not correct
of the machine and documentation or for damages
caused from the imperative standards violation,
negligence, lack of experience, imprudence and
the not respect of regulation standards on behalf
of the employer, of the operator or the maintenance
man and for every possible damage, caused from
an irrational, improper and/or wrong use.
• The manufacturer isn't the responsible for the
consequences caused from the not original spare
parts use or of equal characteristics.
• The manufacturer is the responsible only for the
information showed in the manual original ver-
sion in Italian language.
• The non-fulfillment prescriptions contained in
SIMBOLOGY MEANING
Here follow it is clearly specified the symbols and definitions meaning, which will be used in the present
document.
DANGER
It shows the danger presence for who works on the machine and for who is in the vicinity, so
the indicated activity must be performed in accordance with the actual accident prevention
standards and with the indications showed in the present manual.
PRECAUTION
It shows a warning on useful information and/or further recommendations and/or shrewd-
ness about the actual operation.
ATTENTION
It shows an operation to perform with attention to avoid damage to the machine.

2. GENERAL INFORMATION AND CHARACTERISTICS

USE DESTINATION AND MANUFACTURE PARTS
The mixer here follow called "machine", is a porta-
ble machine designed to beat, whisk, mince, crum-
ble, emulsify, reduce in mash, etc, to use in the col-
lective and institutional restoration.
With the machine in function of the tool that is
used, it is possible to prepare directly in pot thick
vegetable and pasta soups, soups, mashed pota-
toes, creams, batters, mayonnaise, almonds pulp,
cheese creams and what other like that.
this manual will cause the guarantee immediate
decay.
• The factory responsible, that supervision to the
working activities, in the field of the foreseen re-
spective attributions and competence, must:
– Carry out the foreseen safety measures;
– Make informed the operators about the specific
risks whom are exposed and bring to their
knowledge the prevention essential standards;
– Prepare and require that the single operators
observe the safety standards and use the pro-
tection means put at their disposal;
– Get down to work more operators, contempo-
rary, on this product.
The machine is constituted from an electric motor
inserted in a unique fusion of plastic material (base
machine body), in which the motor shaft is connect-
ed to the work tool: electric mixer or whisk.
The tool is connected and blocked to the machine
body or with a screwed nut, or through a fast unhook
junction.
The feed product is charged manually in the con-
tainer and successively, with the use of both the
EN
5