Chap. 4. Put On Service And Use - Hendi 224328 Gebrauchsanweisung

ENVIRONMENTS, WORKING AND PASSING PLACES
The work environment must answer to the directive
89/654/CEE requirements. In the working area for-
eign object must not be present. The employer, in
the directive 89/391/CEE respect, concerning the
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN PARTS
For any occasion the operator must not try to open
or remove a fixed protection or tamper a safety de-
vice.
In the phase of equipment, maintenance, tools
change and cleaning, and during all further manual
operations that happens introducing the hands or
Besides in the cleaning phase or unblock of the in-
serted pieces in the blades that happens also intro-
ducing the hands near the cutting tools, a residual
risk remains due above all to a cut with tools sharp-
ened parts.
Besides, the operator and the maintenance man
must be skilled for the intervention connected to the

CHAP. 4. PUT ON SERVICE AND USE

The machine management is allowed only to the
authorized personnel and opportunely educated and
endowed of a sufficient technical experience.
Before to switch on the machine perform the follo-
wing operations:
The not authorized use of commercial parts and ac-
cessories making part of the protections and safety
devices can cause some malfunctions and the ran-
measures realization turned to promote the safety
and workers health improvement during the work,
must provide to eliminate or reduce the showed re-
sidual risks as foreseen in the present manual.
other body parts in the machine dangerous areas,
a residual risk remains due above all to:
• Knocks with machine manufacturing parts,
• Grazing and/or abrasion with machine rough parts,
• Sharp pain with the sharpened parts,
• Cut with tools sharpened parts.
manual operations with open protections, must be
trained on the joined consequent risks and must be
authorized from a responsible person and must use
adequate individual protection devices, five fingers
anti cutting gloves. All interventions on the discs
must happen keeping them with the blades towards
the bottom side.
• Read with attention the technical documentation,
• Know what protections and emergency devices
are available on the machine, their location and
functioning.
ger situation beginning for the operators. The ope-
rator must besides have received an adequate tra-
ining.
EN
9