Extraordinary Maintenance - Hendi 250VV Bedienungsanleitung

EXTRAORDINARY MAINTENANCE

For the intervention of extraordinary maintenance,
consequent to breaks or revisions or mechanical
and electric damages, it is necessary an interven-
tion request directly to the Authorized Assistance
Center.
CLEANING
It is forbidden to clean by hand the organs and the
elements in motion.
All cleaning interventions must be started only and
exclusively, after having unloaded the machine
with the food product in working and having insu-
lated from the electric feeding source and from
external energy.
The machine hygiene level classification and the
associated equipment, for the foreseen use, are 2
(two): machine that, after a hygiene risk evaluation,
EN
FREQUENCY
At the end of every
shift work and however
before the daily use
16
PERSONNEL MODALITY
Operator All the surface and the machine parts destined to come in contact with
the food product or with the food zones (tools external and internal
surface) and the jets zones (tool superior surface connected with the
machine and machine external surface), must be cleaned and disin-
fected with the under reported modalities. For the grinding group dis-
assembly activities see the previous descriptions.
• Scrape the surfaces from the possible food product residuals (for
example with plastic scrapers);
• Clean all the food zone surfaces and jets zone with a morbid damp-
ened clothes (not draining) with detergent diluted in hot water (also
common soap for dishes is good).

Don't soak them. With a towel clean inside the grinding mouth. Use
specific products for steel, which must be liquids (not in cream or
pastries however abrasive) and above all must not contain chlorine.
Against the fat substances the denatured alcohol.
• Rinse with cleaned hot water and successively dry all food zone
surfaces and jets zone with soft clothes that don't lose coats.
• The mixer tool, being in stainless steel, cannot be washed in dish-
washer, much less the plastic parts.
• The reassembly must happen only following working requirements,
leave the pieces wrapped up in soft dry clothes that don't lose coats.
The instructions about the extraordinary mainte-
nance don't appear in the present instruction
manual for the use and so must be explicitly re-
quested to the manufacturer.
The machine, the electric equipment and the ma-
chine board components must not be ever washed
utilizing water, and not in any kind of jets form and
quantity; so, without "bucket" nor "rubber" nor
"towel".
Don't put ever directly the machine in the sink or un-
der the tap.
is in conformance with applicable international
standards requirements, but requests a pro-
grammed disassembly for the cleaning.