Safety Instructions - Hendi 250VV Bedienungsanleitung

3. SAFETY INSTRUCTIONS

INTRODUCTION
The lacked standards and safety procedures ap-
plications can be danger and damage sources.
The machine means bound in the use for the re-
spect, on behalf of the final user, of:
• All rules, of insertion in the environment and of
people behavior, fixed from the laws and/or appli-
Except where differently specified, the personnel
which performs the installation interventions,
connection, maintenance, reassembly, and reuse,
damages or breakdowns, demolition and disman-
ENVIRONMENTS, WORKING AND PASSING PLACES
EN
The work environment must answer to the directive
89/654/CEE requirements. In the working area for-
eign object must not be present. The employer, in
the directive 89/391/CEE respect, concerning the
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN PARTS
For any occasion the operator must not try to open
or remove a fixed protection or tamper a safety
device.
In the phase of equipment, maintenance, tools
change and cleaning, and during all further manu-
al operations that happens introducing the hands or
other body parts in the machine dangerous areas,
Besides in the cleaning phase or unblock of the in-
serted pieces in the blades that happens also intro-
ducing the hands near the cutting tools, a residual
risk remains due above all to a cut with tools sharp-
ened parts.
10
cable standards; with particular reference to the
fixed plant upstream of the supplied machine and
for its connection / functioning;
• All further instructions and use warnings making
part of the technical / graphic documentation an-
nexed to the same machine.
tling must be a skilled personnel qualified in safety
matter and educated on the residual risks, with the
competencies, in safety matter, of the maintenance
employees.
measures realization turned to promote the safety
and workers health improvement during the work,
must provide to eliminate or reduce the showed re-
sidual risks as foreseen in the present manual.
a residual risk remains due above all to:
• Knocks with machine manufacturing parts,
• Grazing and/or abrasion with machine rough
parts,
• Sharp pain with the sharpened parts,
• Cut with tools sharpened parts.
Besides, the operator and the maintenance man
must be skilled for the intervention connected to the
manual operations with open protections, must be
trained on the joined consequent risks and must be
authorized from a responsible person and must use