Hendi 250VV Bedienungsanleitung Seite 9

The machine must not be used IN NOT CORRECT
WAY or FORBIDDEN so some damages or injuries
could be caused for the operator; in particular:
• It is forbidden to draw the electric feeding cable
or the machine to disconnect the feeding plug,
• It is forbidden to put weights on the machine or
on the electric feeding cable,
• It is forbidden to put the electric feeding cable on
sharp parts or with burn danger,
• It is forbidden the machine use with the damaged
and not integer electric feeding cable or with the
control devices;
• It is forbidden to leave the machine off with the
electric feeding cable connected with the feeding
plug,
• It is forbidden to insert any type of object inside
the motor ventilation cap;
• It is forbidden to put the machine above different
objects from the working ground used in the
food field of height included between 900 – 110
0mm from the trampling level,
• It is forbidden the use of inflammable substanc-
es, corrosive or harmful for the cleaning or
products excessively alkalines as the caustic
soda or ammonia,
• It is forbidden to plunge the machine in water or
in other liquids;
• It is forbidden the not authorized personnel use
and with clothes different from that showed for
the use,
• It is forbidden the use of the whisk tool in the
machines with fixed speed,
• It is forbidden to introduce in the pot with the
machine inserted and in function, products or
objects having characteristics different from
those showed in the normal use, such as for ex-
The user is however responsible of the damages resulting from the lacked observance of the specified
normal use conditions. For possible doubts you can enquire at the Authorized Assistance Center.
ample bones, frozen meat, not food products, or
other objects as scarves, etc...,
• It is forbidden to take, support and handle the ma-
chine, placing the hands in different zones from
those showed in the normal use and however
maintain in function the machine with an only
hand,
• It is forbidden to push or lets push from others
the feed products or the ingredients towards
the bottom of the pot with the inserted machine
and in function, and in general introduce the
hands or any other body part, in the pot during the
machine functioning,
• It is forbidden to introduce the machine in the
pot, more than the immersion nick and however
over the tool blocking nut,
• It is forbidden to remove the machine from the
pot, before that the tool is completely stopped
and however before 10 sec from the machine
stop control,
• It is forbidden to work on the tools block systems
before the tool complete stop, and however be-
fore 10 sec from the machine stop control and
connected to the electric feeding,
• It is forbidden the partial removal of the protec-
tions and of the danger signals.
• It is forbidden the functioning without that all the
precautions about the residual risks elimina-
tion have been adopted on behalf of the user,
• It is forbidden to smoke or use free flame devices
and manipulate incandescent materials, unless
some suitable safety measures aren't adopted,
• It is forbidden to activate or set the control and
blockage devices as knobs or similar both during
the machine functioning both if you aren't author-
ized.
EN
9