Chap. 3. Safety Instructions - Hendi 224328 Gebrauchsanweisung

• It is forbidden to push or lets push from others
the feed products or the ingredients towards the
bottom of the pot with the inserted machine and
in function, and in general introduce the hands or
any other body part, in the pot during the machine
functioning,
• It is forbidden to introduce the machine in the pot,
more than the immersion nick and however over
the tool blocking nut,
• It is forbidden to remove the machine from the
pot, before that the tool is completely stopped
and however before 10 sec from the machine stop
control,
• It is forbidden to work on the tools block systems
before the tool complete stop, and however be-
The user is however responsible of the damages resulting from the lacked observance of the specified
normal use conditions. For possible doubts you can enquire at the Authorized Assistance Center.

CHAP. 3. SAFETY INSTRUCTIONS

INTRODUCTION
EN
The lacked standards and safety procedures appli-
cations can be danger and damage sources.
The machine means bound in the use for the re-
spect, on behalf of the final user, of:
• All rules, of insertion in the environment and of
people behavior, fixed from the laws and/or appli-
Except where differently specified, the personnel
which performs the installation interventions,
connection, maintenance, reassembly, and reuse,
damages or breakdowns, demolition and disman-
8
fore 10 sec from the machine stop control and
connected to the electric feeding,
• It is forbidden the partial removal of the protec-
tions and of the danger signals.
• It is forbidden the functioning without that all the
precautions about the residual risks elimination
have been adopted on behalf of the user,
• It is forbidden to smoke or use free flame devices
and manipulate incandescent materials, unless
some suitable safety measures aren't adopted,
• It is forbidden to activate or set the control and
blockage devices as knobs or similar both during
the machine functioning both if you aren't author-
ized.
cable standards; with particular reference to the
fixed plant upstream of the supplied machine and
for its connection / functioning;
• All further instructions and use warnings making
part of the technical / graphic documentation an-
nexed to the same machine.
tling must be a skilled personnel qualified in safety
matter and educated on the residual risks, with the
competencies, in safety matter, of the maintenance
employees.