Safety Instructions; On This Section; Intended Use; Inappropiate Use - Bosch Rexroth PRC7000 MGDM-BASIC Betriebsanleitung

48/80 Bosch Rexroth AG | Electric Drives and Controls
2

Safety instructions

This section includes important information on the safe handling of the
described product.
2.1

On this section

The described product has been developed, manufactured, tested and
documented in compliance with the EU standards.
Nevertheless there is a danger of personal injuries and damage to
property if you fail to observe this section and the safety instruction in
this documentation.
Therefore read this documentation carefully and fully before you

work with the product.
Keep the documentation so that all users have access to it any time.

Always provide the product to third parties together with the product

documentation.
2.2

Intended use

• The product serves as IO-connection for the PRC7000 Process Resistance
Welding Control.
• The product is only intended for professional/industrial operation
and not for private use.
• The product is intended for operation in industrial environments
(emission class A, group 2) and complies with the following directives
and standards:
Directives
EMC directive 2014/30/EU
•
Standards
EN 62135-2
•
Intended use also means that you have read and understood the product
documentation.
2.3

Inappropiate use

This class A equipment is not intended for use in residential locations
where the electrical power is provided by the public low-voltage
supply system.
The inappropriate use of the product may lead to operating statuses in
your application which cause physical injury and/or damage to
property.
Any use other than described as "intended use" is "inappropriate" and
therefore inadmissible.
Inappropriate use of the product includes in particular:
• operation in potentially explosive atmospheres,
• operation outside the technical data,
R911407405 | Rexroth PRC7000 MGDM-Basic
NOTICE