Maintenance And Repair - Bosch Rexroth PRC7000 MGDM-BASIC Betriebsanleitung

58/80 Bosch Rexroth AG | Electric Drives and Controls
Plugging or unplugging modules or connectors/terminals into/fromlive
systems
Possibility of damage to the electrical equipment, unexpected
plant reactions!
Unless described otherwise, never unplug or plug any connectors/

terminals on live systems.
3.5

Maintenance and repair

Plugging or unplugging modules or connectors/terminals into/fromlive
systems
Possibility of damage to the electrical equipment, unexpected
plant reactions!
Unless described otherwise, never unplug or plug any connectors/

terminals on live systems.
Electrostatic charge
Possibility of damage to the electrical equipment!
Observe all precautions for ESD protection when handling modules

and components and avoid electrostatic discharge.
Observe the following protective measures for modules and

components sensitive to electrostatic discharge (ESD):
Personnel responsible for storage, transport, and handling
must have training in ESD protection.
ESD-sensitive components must be stored and transported in

the prescribed protective packaging.
ESD-sensitive components may generally only be handled at
special ESD workplaces.
Personnel, working surfaces, as well as all equipment and

tools which may come into contact with ESD-sensitive
components must have the same potential (e.g. by grounding).
Wear an approved grounding bracelet. The grounding bracelet

must be connected with the working surface through a cable
with an integrated 1 megaohm resistor.
ESD-sensitive components may by no means come into contact

with chargeable objects, including most plastic materials.
When inserting or removing ESD in/from other devices, the device

must be safely disconnected from the supply.
R911407405 | Rexroth PRC7000 MGDM-Basic
NOTICE
NOTICE
NOTICE