70/80
Bosch Rexroth AG | Electric Drives and Controls
R911407405 | Rexroth PRC7000 MGDM-Basic
13 XFS1 Bus 1
13.1 Pin assignment XFS1
Fig. 20: XFS1 assignment
Note: Contact arrangement view from above the MGDM
13.1.1 Connection XFS1 (Bus 1)
The connecting cable to XFS1 must be shielded.
Fig. 21: Circuit diagram XFS1
The assignment of the data channels to XFS1 is crossed compared to the standard
Ethernet assignment!
For fast hotplug, XFS1 must be connected directly to a Sercos-Master interface via a
patch cable.