26/44
Bosch Rexroth AG
To this Documentation
1.3
Display of information
In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1
Safety instructions
For Safety instructions please refer to Tab. 1: Required and supplementary
documentation Rexroth PST6xx0 Weld timer with Thyristor power unit Instructions
and the Rexroth Weld Timer Safety and user information.
1.3.2
Symbols
The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol
Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step
1.
Numbered step:
2.
The numbers specify that the Steps are completed one
after the other.
3.
1.3.3
Designations
This documentation uses the following designations:
Designation
Tab. 3:
Designation
Meaning
BOS 6000
Bedienoberfläche Schweißen (Welding Software)
1.3.4
Abbreviations
For information on the abbreviations used in this documentation, refer to Tab. 1:
Required and supplementary documentation Rexroth PST6xx0 Weld timer with
Thyristor power unit Instructions.
R911172804 | PST 6xxx.323