76/80
Bosch Rexroth AG | Electric Drives and Controls
R911407405 | Rexroth PRC7000 MGDM-Basic
Refer to the section 16 for the meaning of the LEDs.
The LEDs US1, UD2, PWR and MS should be on the status green.
18.1 Docking
To ensure a safe start-up, the MGDM must be docked without voltage.
19 Maintenance
Check terminal and clamp connections of all cables for damages
and firm sit. Replace defective parts immediately.
19.1 Replacement of components
The replacement of components is reserved to authorisized staff
(trained maintenance staff or field service).
20 Disposal
20.1 Recovery of materials
The products manufactured by us can be returned to us free of charge
for proper disposal.
However, the following conditions have to be satisfied for this purpose:
• no deposits such as oil, grease or other contamination
• no inappropriate extraneous materials or third-party components included.
The packaging materials are made of cardboard, wood and polystyrene.
For environmental reasons, please do not return any empty packagings
to us. They can be easily recycled.
The products are to be sent postage prepaid to the following address:
Bosch Rexroth AG
Bürgermeister-Dr.-Nebel-Straße 2
D-97816 Lohr am Main
Germany
20.2 Recycling
Principal components of our electronic equipment:
• Steel, aluminum, copper, plastic materials.
Due to their high metal content, most of the materials of our products
can be recycled. In order to ensure optimum recovery of metals, the
equipment has to be split into individual components.
The metals that are contained in the electric and electronic modules can