Leds - Bosch Rexroth PRC7000 MGDM-BASIC Betriebsanleitung

R911407405 | Rexroth PRC7000 MGDM-Basic

14 LEDs

Features:
At the front part of the MGDM are arranged 4 Diagnosis LEDs.
LED „ PWR" Status internal power supply
Tab. 8:
State Meaning
dark No internal power supply
yellow Internal power supply available, configuration start
green Internal power supply available
LED „ MS" Modul Status
Tab. 9:
State Meaning
dark Module not in operation
red Hardware fault, switch module off and on again
yellow Not used
flashing yellow Not used
green Module state ok
flashing green Not used
LED „ S" Sercos Status
Tab. 10:
State Meaning
dark no Sercos communication
orange Sercos communication phase 0 is active
flashing green once, Sercos communication phase 1 is active
then orange
flashing green 2 Sercos communication phase 2 is active
times, then orange
flashing green 3 Sercos communication phase 3 is active
times, then orange
green permanent Sercos communication phase 4 is active
flashing yellow then Device is in hot plug phase 0
green intermittently
flashing once Device is in hot plug phase 1
orange then green
permanent
flashing 2 times Device is in hot plug phase 2
orange then green
permanent
flashing green RT-Status has changed from fast-forward to loopback
Bosch Rexroth AG 71/80