Display Of Information; Safety Instructions; Symbols; Designations - Bosch PRC 7 00-L /W 402 Serie Typspezifische Anleitung

28/46 Bosch Rexroth AG | Electric Drives and Controls
1.3

Display of information

In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1

Safety instructions

For safety instructions refer to Tab. 1: Required and supplementary
documentation Rexroth PRC7000 Process Resistance Welding Control
Instructions and Rexroth Weld Timer Safety and user information.
1.3.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Tab.2: Meaning of the Symbols
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3

Designations

This documentation uses the following designations:
Tab.3: Designation
Designation Meaning
BCD
Binary coded decimal number
ELMO
Electromotive
e.l.c.b. earth leakage circuit breaker
HIP
Hall Installation Plate
KSR
Constant current regulation
MGDM Measuring Gun data Module
MOV
Metal oxide varistor
PHA Phase angle
PRC 7000 Process Resistance Welding Control
PRI 7000 Process Resistance Welding Interface
PSF
Prozess stability
R911381739 | PRC 7x00-Lx/Wx-402