32/53
Bosch Rexroth AG
To this Documentation
1.3
Display of information
In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1
Safety instructions
The Safety instructions please look in Tab. 1: Required and supplementary
documentation Rexroth PSI6xxx Weld Timer with Medium-Frequency Inverter
Instructions and Rexroth Weld Timer Safety and user information.
1.3.2
Symbols
The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol
Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step
1.
Numbered step:
2.
The numbers specify that the Steps are completed one
after the other.
3.
1.3.3
Designations
This documentation uses the following designations :
Designation
Tab. 3:
Designation
Meaning
BOS 6000
Bedienoberfläche Schweißen (Welding Software)
KSR
Constant current regulation
LTIB
Leistungsteil-Inbetriebnahmetool
LTIBWin
Leistungsteil-Inbetriebnahmetool unter Windows
PHA
Phase angle
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
PSI
Programmable weld timer with inverter
1.3.4
Abbrevations
The in this documentation used abbrevations please look in Tab. 1: Required and
supplementary documentation Rexroth PSI6xxx Weld Timer with Medium-
Frequency Inverter Instructions.
1070087044 | PSI 6xxx.000