Display Of Information; Safety Instructions; Symbols; Designations - Bosch Rexroth PSI 6xCx.156 Typspezifische Anleitung

R911338219 | PSI 6xCx.156
1.3

Display of information

In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1

Safety instructions

For safety instructions please refer to Tab. 1: Required and supplementary
documentation Rexroth PSI6xxx Weld Timer with Medium-Frequency Inverter
Instructions and Rexroth Weld Timer Safety and user information.
1.3.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3

Designations

This documentation uses the following designations:
Designation
Tab. 3:
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
Constant-current regulation
KSR
PHA
Phase angle
PSF
Prozess stability
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
STC TEACH Sheet Thickness Combination, teaching
UIR
UI control
XQR
UI control module
1.3.4

Abbrevations

For information on the abbrevations used in this documentation, refer to Tab. 1:
Required and supplementary documentation Rexroth PSI6xxx Medium-
Frequency Inverter Instructions.
Bosch Rexroth AG 33/59
Regarding this Documentation