Service And Support - Bosch Rexroth PRC7000 MGDM-BASIC Betriebsanleitung

78/80 Bosch Rexroth AG | Electric Drives and Controls
Logic
Nominal current Logic
Losses
Cable lengths
Wire size
Mechanical data
Tab. 18:
Weight
Dimensions
Tightening torque M12
plug connector
1)
Mechanical load at plug connectors too high!
Damages or tearing off of the M12 plug connectors!
Excessive tensile loads must be avoided and can cause individual

conductors at the plug or in the cable to tear off and thus lead to
function failure (refer to Fig.60 locations of connectors with angle
plugs).

23 Service and Support

Contact Service-Hotline and Service Helpdesk under:
Service Germany
Phone: +49 9352 40 5060
Fax: +49 9352 18 4941
E-Mail: service.svc@boschrexroth.de
Internet:http://www.boschrexroth.com
Additional information on service, repair (e.g. delivery addresses) and training can be
found on our internet sites.
Service worldwide Outside Germany, please contact your local service office first.
For hotline numbers, refer to the sales office addresses on the internet.
Preparing information To be able to help you more quickly and efficiently, please have the
following information ready:
• Detailed description of malfunction and circumstances
• Type plate specifications of the affected products, in particular type codes and
serial numbers
• Your contact data (phone and fax number as well as your e-mail address)
R911407405 | Rexroth PRC7000 MGDM-Basic
approx. 0,2 A (24 VDC without additional consumers
at the sensor or I/O interfaces)
5 W
Max. 30m
According to the M12 plug connectors manufacturer
specifications
approx. 1 kg
Refer to dimensioned drawings
0,4 Nm refer to 1)
Angle plug: plug direction is defined by coding
NOTICE