Checchi & Magli WOLF PRO Bedienungs- Und Wartungsanleitung Seite 57

Proceed as outlined below.
1) Loosen the screws (A).
2) Move the cam (B) to the required position.
3) Tighten the screws (A).
4) Carry out the same procedures to adjust the other
cams.
NOTICE
All cams must be set in the same position.
Protection skid adjustment
The protection skid serves to prevent any root balls from
causing irregularities when planting the seedlings.
NOTICE
Use the protective skid when planting seedlings in
bare soil.
When planting seedlings with the plastic mulching
sheet, the protection skid must be raised to the maxi-
mum limit.
Proceed as outlined below.
1) Loosen the screws (A).
2) Remove the skid (B) from the ground.
3) Tighten the screws (A).
4) Carry out the same procedures to adjust the other
protection skids.
Adjusting the automatic safety release function
The automatic release is designed to protect the trans-
mission components from overloads (e.g. if the dispens-
er jams, etc.).
The device is already set by the manufacturer during the
testing stage, but can be adjusted by the user according
to requirements.
For ploughshare adjustments, proceed as outlined be-
low.
Turn the ring nut (A) clockwise to increase the release
resistance (i.e. less sensitive).
Turn the ring nut (A) anticlockwise to decrease the re-
lease resistance (i.e. more sensitive).
English language
ADJUSTMENT INFORMATION
UN41 0788NQ
UN41 0789NQ
A
UN41 0790NQ
19
C
A
B
B A
5
Use and maintenance