Adjustment Information - Checchi & Magli WOLF PRO Bedienungs- Und Wartungsanleitung

Safety advice for the adjustments
Maintenance and adjustment work must be car-
ried out with the work vehicle on flat and compact
ground, with the tractor engine off, parking brake
Planting depth adjustment
Proceed as outlined below.
1) Use the lock (A) to release the knob (B).
2) Turn the knob (B) to increase or decrease the depth
of the hole drilled in the ground by the cup.
3) After adjustment secure the knob (B) with the lock
(A).
In special ground conditions, for example with slight-
ly sloping ground, it may be necessary to adjust the
height of the wheels separately.
For adjustments, carry out the procedure outlined.
1) Loosen the screws (D) and raise or lower the wheel as
needed.
2) Tighten the screws (D).
Adjust the other wheel in the same way.
Adjusting the packing efficiency
The packing wheels are used to compact the soil around
the planted seedlings.
Their arrangement (spacing and tilt) determines the ef-
fectiveness of the packing.
Tilting the packing wheels will increase or decrease the
compaction of the soil around the seedlings.
NOTICE
To plant the seedlings in bare soil, set the packing
wheels in an upright position.
To plant the seedlings in soil with a plastic mulch
sheet, tilt the packing wheels.
English language

ADJUSTMENT INFORMATION

engaged, ignition key removed, and adopting all the
necessary safety measures required to work safely.
UN41 0783NQ
F
E
UN41 0784NQ
16
B A
D
D
B
Use and maintenance
5
C
A