Silvercrest SKGE 2000 D3 Bedienungs- Und Sicherheitshinweise Seite 63

˜ Before first use
Remove the packaging . Check if all parts are
complete .
During production, some parts are covered
with a thin oil film for their protection .
Before first use, operate the product without
any food so that any potential residues
evaporate .
Clean the product and its accessories
(see "Cleaning and care") .
NOTE: The first few times the product is
heated up, a faint odour may be present .
Ensure sufficient ventilation in the area .
˜ Operation
CAUTION! Risk of burns. The surfaces of
the product become extremely hot during use .
Touch the product only by the handle .
Close the lid using the handle
4 ] [
Slide the fat collection tray
product .
NOTE: The liquids or fat escaped from the
grilled food flow in the direction of the fat
outlet into the fat collection tray
[ 7 ]
Turning the product on:
– Turn the heat level control
Connect the power plug
socket-outlet .
– The red indicator
indicator light up .
8 ] [
Turning the product off:
– Turn the heat level control
– Disconnect the power plug
socket-outlet .
– The red indicator
62 GB/MT
.
2 ] [
into the
14 ] [
.
14 ] [
to MIN .
10 ] [
to a suitable
[ 6 ]
and the green
9 ] [
to MIN .
10 ] [
from the
[ 6 ]
goes off .
[ 9 ]
Setting the heat level: Turn the heat level
control to the desired position (Fig . D):
10 ] [
Heat level
MIN
Stop heating up
Range a
Heating up/low
temperature
Range b
Medium temperature
(e .g . cooking vegetables)
Range c
High temperature
MAX
(e .g . grill-roasting meat)
Set the heat level control
position . The green indicator
When the desired temperature has been
reached, the green indicator lights up .
Light indicator
Red indicator on
[ 9 ]
Red indicator off
9 ] [
Green indicator
[ 8 ]
Green indicator
[ 8 ]
NOTES:
During operation, the green indicator
goes on and off from time to time . This
indicates that the product is reheating up to
the set temperature .
The green indicator
heat level control
10 ] [
lower area of the heat level range a . As soon
as you set the heat level control to the desired
position, the green indicator goes off until the
temperature has been reached .
to the desired
10 ] [
goes off .
[ 8 ]
Status
Product on
Product off
off Product is
preheating/
reheating .
on The set temperature
has been reached .
8 ] [
lights up when the
[ 8 ]
is set to MIN or in the