Operation - Silvercrest SKGE 2000 D3 Bedienungs- Und Sicherheitshinweise

mWARNING! Risk of
electric shock! Do not
immerse the product in water
or other liquids . Never hold the
product under running water .
mWARNING! Risk of
electric shock! Never use a
damaged product . Disconnect
the product from the power
supply and contact your retailer
if it is damaged .
The product is not to be used
if it has been dropped, if there
are visible signs of damage .
The product is powered at all
times while it is connected to
the power supply .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
60 GB/MT
Regularly check the power
plug and the power cord for
damages . If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .

Operation

The product must not be
left unattended while it is
connected to the supply mains .
Do not move the product while
it is in operation .
Do not use the product without
an inserted set of hotplates .