Change To Another Feeder Tray - FP FPi 6600-2 Betriebsanleitung

3. Enter the height of the document.
3
4. Tap the [Address] tab to set the address position for a main document.
5. Confirm the document settings with [OK].
6. Complete the Fold Settings and Exit Settings to complete the job and tap [Save] to
save the job.
Follow the instructions as described in

Change to Another Feeder Tray

If you want to move the main document or enclosures to another feeder tray:
1. Select a job from the Job list.
2. Tap the document that you want to move to another feeder tray.
All available feeder trays are marked with a dotted box.
46
'Create a test mail set'
You cannot change the order of the documents in the mail set by
changing feeders. If you want to change the order of the mail set,
see Delete or move an enclosure
on page 35.
on page 50.