Finish the Job Definition and Start the Job
When you have finished the exit settings, the touch screen shows an overview of the job
settings.
3
In this screen you can change the following settings:
• Move documents between feeders (see
• Link feeders (see
• Change the counter settings (see
When you are ready with these settings, proceed as follows:
1.
Load the documents
2.
Tap [1x] to create a test mail set (see
3.
If desired, you can save the job (see
4.
Tap [Start] to start the job.
34
Link feeder trays
on page 47)
Change the counter settings
on page 55 as indicated on the Job info screen.
Test mail set
Save a job
Change to an other feeder tray
on page 35).
on page 49).
on page 46)
on page 31)