Herunterladen Inhalt Inhalt Diese Seite drucken

Clean And Replace Brushes - FP FPi 6600-2 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Clean and Replace Brushes

When dirty or saturated, clean the brushes of the envelope sealing or replace them as
follows:
1.
Moisten the new brushes in water.
2.
Lift the unlocking lever A of the upper unit and pull up the upper unit.
3.
Remove the brushes one by one by pulling them down from the brush holder.
9
4.
Replace the brushes. Make sure that the studs on the brushes are fitted in the
corresponding holes in the brush holder.
124

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis