Create A New Job - FP FPi 6600-2 Betriebsanleitung

6. Check the example mail set.
7. If example mail set is OK: tap [Start].If the example mail set is not OK: adjust the
address position or envelope stop position or check and re-adjust the job settings.
3
8. Tap [Start] to start the job.
9. Press the [Stop] button to finish the job.
10. Tap [Job list] to return to the job list.

Create a New Job

To create a new job:
1. From the Job list menu, tap [New job].
2. Choose [Automatic] or [Manual] to create a new job.
3. If you choose 'Automatic' follow the description as can be found in
job on page 21.
4. If you choose 'manual' follow the description as can be found in
20
If desired tap the counter button to set the counters. See
settings on page 31.
Counter
Create an Automatic
Create a manual job.