High Capacity Conveyor Belt - FP FPi 6600-2 Betriebsanleitung

High Capacity Conveyor Belt

The high capacity conveyor belt is designed for envelope transport from the inserter or
franking device. The conveyor belt has two operation modes:
• The belt moves continuously.
• The belt moves in intervals. The belt moves about 45 mm (1.7 inch) each time a
sensor detects the passage of an envelope.
The guide plate and side guides prevent the envelopes from falling off the belt.
The conveyor belt switch has three positions:
5
• Mode D: the belt moves in intervals.
• Mode E: the belt is switched off.
• Mode F: the belt moves continuously.
72