FP FPi 6600-2 Betriebsanleitung Seite 51

5. Select if you want to feed envelopes with flaps up (On) or with flap down (Off).
6. Tap [OK] to save and close the envelope settings.
7. Complete the Fold Settings and Exit Settings to complete the job and tap [Save] to
save the job.
Follow the instructions as described in
Create a Job with Custom Documents
1. Create a Manual job
document or enclosure.
2. Tap [Custom] to create a custom document.
'Create test mail set'
Makes sure that your custom documents fit within the specifications
(see Document Specifications
on page 23 and select a custom document as your main
on page 35.
on page 143).
3
45