FP FPi 6600-2 Betriebsanleitung Seite 145

Flap not sufficiently
moistened.
Envelope not always
ejected from sealer.
Water level low.
Brushes dry.
Brushes dirty.
Moistening felt dry.
Moistening felt dirty.
Brushes worn out.
Moistening felt worn
out.
Inserted document
too big.
Document not inser-
ted deep enough.
Sealing area dirty.
Check water level,
refill if needed.
Check brushes, re-
place if needed by the
extra soaked set.
Check brushes, clean
if needed.
Check the moistening
felt, refill water tray if
needed.
Check the moistening
felt, clean if needed.
Replace brushes.
Replace moistening
felt.
Check fold settings,
adjust if needed.
Check adjustment of
envelope stop posi-
tion and fingers.
Clean sealing area.
Filling the Sealing Li-
quid Reservoir on
page 68
Clean and replace
brushes
Clean and replace
brushes
Filling the Sealing Li-
quid Reservoir on
page 68 #
Replace or clean
moistening cloth
Clean and replace
brushes
Replace or clean
moistening cloth
Editing a job
Verifying the Insert
Position on page 39
Maintenance Sched-
ule on page 123
139
10