Operating Instructions; Installing The Envelope Catch Tray; Starting Up - FP FPi 600 Betriebsanleitung

3.

OPERATING INSTRUCTIONS

3.1 Installing the Envelope Catch
Tray
To install the envelope catch tray:
1. Move the catch tray until the clamps hold the
feet of the system.
2. Adjust the catch tray to the correct envelope
size.
3.2

Starting Up

Warning
You can severely damage the system if it is connected to the incorrect power supply.
Before plugging in the system, check if the local voltage is the same as the voltage
mentioned on the type plate.
For the location of switches and buttons, see "Operating Controls" on page 7.
To start up the system:
1. Connect the system to the mains power
supply.
2. Use the power switch to switch the system
on. The power switch is located at the back of
the system.
3. Press the power button next to the display.
The touch screen shows the home menu.
11