Create Jobs with Reading
Create an OCR Job
To create a job with OCR:
1.
From the Job list menu, tap [New job].
2.
Choose [Manual] to define the job settings.
3.
Select an envelope.
4.
Tap [Main document].
5.
Tap [Custom].
6.
Enter the document size or select a standard type.
7.
Tap the [Reading] tab.
8.
Select the code type [OCR].
9.
Configure the location of the n / m characters by setting the offset of the top and left
side of the sheet [1] and [2].
10. Configure the width of the n / m characters [3].
11. Load a sample document in the feeder tray as indicated.
12. Tap [Verify] to check if the page n / m characters are read successfully.
8
113